Danfoss Hydronic Floor Heating Systems
Danfoss provides you with the optimum floor heating solutions. The Danfoss solutions rank among the best and most advanced in the world; combining years of experience with development and technical know-how. We provide floor heating solutions which are both quickly and easily installed for you. Our wide range of products and our technical expertise make Danfoss your one-stop provider!
FHF Manifolds
The Danfoss floor heating manifolds are used for heat regulation in floor heating systems. Both flow and return manifold have 1” connections, with connections for between 2 to 12 heating circuits. The manifold is equipped with Danfoss’ integrated valves with pre-setting for easy installation and commissioning. The valves are controlled by Danfoss' TWA thermal actuators. A full programme of manifold accessories, including brackets, end sections with drain taps and automatic air vents, ball valves, thermometer and reduction pieces, is available.
FH-Wx - Hard-wired Control System
The Danfoss FH hardwired floor heating control is a control system with room thermostats connected to a central unit by electrical wires. The system includes three types of room thermostats - standard, featured (e.g. with floor sensor) and tamperproof. An integrated timer (optional) for the connection box enables the system to be divided into two zones with individuel temperature control.
FHM Compact Mixing Shunts
The prefabricated FHM-C - Mixing Shunts
The prefabricated Danfoss floor heating mixing shunts are used for regulating the correct flow and supply temperature in hydronic floor heating systems.
The compact design and flexibility allows mount¬ing the mixing shunt directly to the manifold, both on left and right side and primary pipe connection to the shunt from the side or below. A self-acting proportional regulator is used to regulate the supply temperature. The regulator ensures the correct mix so that the desired supply temperature to the underfloor heating system always remains constant. A possible safety thermostat protects the floor against too high temperatures and the electronic variable speed pump is adjusting itself for correct flow in the circuits. A standard 3-speed pump is also available. The built-in check valve ensures correct flow direction. An air-vent on top and a thermometer in supply completes the mixing shunt.
Danfoss floor heating mixing shunts are used for regulating the correct flow and supply temperature in hydronic floor heating systems. A partner component that suites Solar heated solutions, ensuring that the solar heated water is mixed at a preset temperature, ensuring the regulated temperature flowing through the Pex Piping in the floor is maintained.
